|  |
 | IDE-Interface DBox2 Nokia from Hallenberg |  | Expands your D-Box 2 Nokia to a hard disk receiver (HDD-Receiver) and allows the connection of an internal hard drive.
| Art.No.: | 2507 | | Weight: | 0,60 kg | | Delivery time: |  immediately available |
This product variant is not available.
|
Features of the IDE-Interface:
- 40pin IDE-Connector for 3.5" HDD or 2.5" HDD
- Prepared for the RTC (RealTimeClock) / RealTimeClock for the dbox2
- Connector for an external LED via solderpoint or connector possible
- Solder pad or connector for alternative IRQ 6 (needed for a paralell usage of a Multicam)
- Supports Compact Flash cards via adapter
- All unused points of the XC95144XL are connectable for future applications
The IDE-Interface contains the following:
- IDE-Interface
- 10 Pin cable to connect to the Modemport
- 2x Plastic screws M3x12
- 2x Plastic bolts M3
- 2x Distance piece 5mm
You can order more optional features or add on's from below:
- HDD-kit (It contains: Universal HDD Holder for a 2.5" HDD, IDE-Adapter 2.5" to 3.5", IDE cable, Fitting material for the Installation)
- RealTimeClock Onboard (RTC)
- HDD IDE 2.5" (2.5" IDE-Hardrives)
- Power Supply for Hard Drives
- Installation (for customers who do not want to install the Interface themselve)
ATTENTION: Should you already own a working HDD Interface from another manufacturer we would be able to take this back and would honour you with a one time payment of 15.- Euro.
We will test the old Interface on arrival and give you a credit of 15.- Euro for your next purchase. A detailed installation instructions can be found on the website http://www.dbox2.net/html/hdd-interface.htmlThe IDE interface is only for installation in Nokia boxes with 32MB or 64MB ONBOARD suitable. For boxing, with only 16MB ONBOARD, it must also upgrade the RAM to 32MB onboard (Item-No: 2535) or 64MB onboard (Item-No: 2536) are implemented. | | |
|  | |
|
|
Digitalreceiver
IDE-Interface
