Quicksearch 
Digitalreceiver
DBox2-Tuning
IDE-Interface
Hard Disk Drives
Accessories
Spare parts
Repair
Residual item
Last seen: 

 

IDE-SATA-Interface DBox2 Philips

IDE-SATA-Interface DBox2 PhilipsExpands your D-Box 2 Philips to a hard disk receiver (HDD-Receiver) with a MicroSD-Slot and allows the connection of an internal and external hard drive and a MicroSD card.
 
Art.No.:2504
Weight:0,60 kg
Delivery time: immediately available

HDD-Kit:
MicroSD:
HDD IDE 2.5:
HDD SATA 2.5:
eSATA-Kit:
Installation:

 
Including VAT (19%)


 
Add to cart
Features of the IDE-SATA-Interface:
  • 40pin IDE-Connector for 3.5" HDD or 2.5" HDD
  • 7pin SATA-Connector for 3.5" HDD or 2.5" HDD
  • MicroSD Cardreader / reading and writing on micro-SD card max. Size 1GB
  • Prepared for the RTC (RealTimeClock) / RealTimeClock for the dbox2
  • 5V power supply onboard - 2A (up to 2Amp short time!) with onboard automatic shutoff to run up to 2x 2.5" HDD and the RTC
  • 5V connection via modem port for 2.5" HDD
  • 3x additional connectors for fan (5V)
  • LED for HDD-activity onboard / Connector for an external LED via solderpoint or connector possible
  • Solder pad or connector for alternative IRQ 6 (needed for a paralell usage of a Multicam)
  • Supports Compact Flash cards via adapter
  • All unused points of the XC95144XL are connectable for future applications
Detailed information about our IDE-SATA-Interface and all the features found on our website http://www.dbox2.net/html/hdd-interface.html
Prerequisite for the proper operation of your dbox2 with an HDD interface is a current version of the Linux software.
 
The IDE-SATA-Interface contains the following:
  • IDE-SATA-Interface
  • 12 Pin cable to connect to the Modemport
  • 1x Screw M3x12
  • 1x Distance piece 5mm

You can order more optional features or add on's from below:
  • HDD-kit (It contains: Universal HDD Holder for a 2.5" HDD, IDE-Adapter 2.5" to 3.5", IDE cable, SATA-Cable,  Fitting material for the Installation)
  • MicroSD-Cards
  • HDD IDE 2.5" (2.5" IDE-Hardrives)
  • HDD SATA 2.5" (2.5" SATA-Hardrives)
  • eSATA Kit (It contains: SATA to eSATA cable, bracket 2x SATA to eSATA for the PC, USB cable for power a 2.5" external eSATA-drive)
  • Installation (for customers who do not want to install the Interface themselve) does not include the installation of eSATA Kit
 
ATTENTION:
Should you already own a working HDD Interface from another manufacturer we would be able to take this back and would honour you with a one time payment of 10.- Euro.
We will test the old Interface on arrival and give you a credit of 10.- Euro for your next purchase.
 
A detailed installation instructions can be found on the website http://www.dbox2.net/html/hdd-interface.html
Customers who bought this item also bought: