|  |
 | IDE-Interface DBox2 Philips |  | Expands your D-Box 2 Philips to a hard disk receiver (HDD-Receiver) with a SD-Slot and allows the connection of an internal hard drive and a SD card.
| Art.No.: | 2503 | | Weight: | 0,60 kg | | Delivery time: |  1-3 days |
This product variant is not available.
|
Features of the IDE-Interface:
- 40pin IDE-Connector for 3.5" HDD or 2.5" HDD
- SD-/MMC-Cardreader / read and write to SD-Card, Mini-SD-Card, MicroSD-Card or MMC-Card max. Size 1GB
- Prepared for the RTC (RealTimeClock) / RealTimeClock for the dbox2
- 5V power supply onboard - 2A (up to 2Amp short time!) with onboard automatic shutoff to run up to 2x 2.5" HDD and the RTC
- 5V connection via modem port for 2.5" HDD
- 3x additional connectors for fan (5V)
- LED for HDD-activity onboard / Connector for an external LED via solderpoint or connector possible
- Solder pad or connector for alternative IRQ 6 (needed for a paralell usage of a Multicam)
- Supports Compact Flash cards via adapter
- All unused points of the XC95144XL are connectable for future applications
Prerequisite for the proper operation of your dbox2 with an HDD interface is a current version of the Linux software.
The IDE-Interface contains the following:
- IDE-Interface
- 12 Pin cable to connect to the Modemport
- 1x Screw M3x12
- 1x Distance piece 5mm
You can order more optional features or add on's from below:
- HDD-kit (It contains: Universal HDD Holder for a 2.5" HDD, IDE-Adapter 2.5" to 3.5", IDE cable, Fitting material for the Installation)
- SD-Cards
- HDD IDE 2.5" (2.5" IDE-Hardrives)
- Installation (for customers who do not want to install the Interface themselve)
ATTENTION: Should you already own a working HDD Interface from another manufacturer we would be able to take this back and would honour you with a one time payment of 10.- Euro.
We will test the old Interface on arrival and give you a credit of 10.- Euro for your next purchase. | | |
|  | |
|
|
Digitalreceiver
IDE-Interface
